Linksys AC600 MU-MIMO WiFi review
Can you boost WiFi speed with the Linksys Max-Stream AC600 Wi-Fi Micro USB Adapter?
- Strong performance at mid-range on 5GHz networks
- Can boost pre 802.11ac mobile devices
- Weaker than recent built-in laptop antennae
The AC600 USB dongle works best when not too near and not too far from the router. It also makes the most noticeable difference on the 5GHz band. But if you've a recent mobile device the internal antennae setup is likely to be faster.
Price$ 60.00 (AUD)
As part of an ongoing WiFi investigation we’ve tested three of the latest routers from Netgear, Linksys and D-Link. The first two use the latest, speedy MU-MIMO technology which keeps fast devices running fast even if there are slow devices on the same network (with D-Link the MU-MIMO firmware is in beta). The trouble is, you need a MU-MIMO-compatible adapter in your mobile device to make MU-MIMO work and most laptops and tablets don’t have that.
The good news here is that while we’ve come to expect proprietary technology solutions (ugh!) in this area to only work with specific brands and/or products, a MU-MIMO USB device like the AC600 will work with any MU-MIMO router.
As we found in our primary MU-MIMO test, WiFi adapters that are already built in to mobile devices can already achieve strong performance on a MU-MIMO router as the routers tend to be fast anyway and the notebook’s antennae are strong. So does using something like the MAX-Stream AC600 Wi-Fi Micro USB Adapter make things faster?
How we tested
Testing was performed in a three-storey, Sydney townhouse. On the ground floor was our wireless router which was connected via Ethernet cable to our Alienware Alpha test PC. We then performed three sets of speed tests: next to the router, in a bedroom one floor up and finally two floors up in a second bedroom. We used three of the latest routers: Netgear’s Nighthawk X8, D-Link’s DIR-895L and Linksys EA9500 plus our existing router, an older D-Link DIR-890L (which is isn't MU-MIMO compatible and only has one 5GHz network band) for comparison. We ensured that each test was stable and ran it again if it was not.
In order to test the MU-MIMO technology, we added other devices to each network: we had an old iPad 2 playing V for Vendetta on Netflix (next to the router) and Tinkerbell and The Lost Treasure playing on an Xbox One upstairs (also using Netflix) in the second bedroom. We also performed tests on an empty network from the one-floor-up bedroom for comparison.
We then transferred a 2GB movie file across the networks using both 2.4GHz and 5GHz WiFi bands. We did this using both the native WiFi adapter in a Surface Pro 3 – a Marvell AVSTAR Wireless-AC Network Controller – and then we disabled that and ran the tests using the Surface Pro 3 with the Linksys AC600 MU-MIMO USB dongle. All computers were running Windows 10.
All results are posted in MegaBytes per second. Results from the Surface Pro 3 are in orange while the results from the Linksys AC600 MU-MIMO dongle are in Blue.
The D-Link routers use a technology called Smart Connect where they broadcast one network ID and then the router automatically chooses which band (2.4GHz or 5GHz) to use to connect to your device. It appears the older D-Link router chose the 5GHz band to sneak in a high score (the newer one didn’t). Nonetheless, with the rest of the devices, the Surface Pro 3’s WiFi noticeably outscored the AC600 MU-MIMO dongle. It appears the AC600 doesn’t like being too close to a 2.4GHz network.
In the 5GHz tests the newer D-Link router appears to have chosen the 2.4GHz band and ran slow accordingly. However, in all the other tests, while the AC600 dongle scored consistently higher (than in the 2.4GHz tests) it was still roundly beaten by the integrated WiFi of the SP3.
One floor up
At 2.4GHz In the first bedroom, There wasn’t much change among most of the Surface Pro 3 scores (the older D-Link model looks to have dropped back to a decent 2.4GHz speed here). Interestingly, while all the AC600 MU-MIMO dongle scores were lower than the SP3 (again) both the Netgear and D-Link scores stayed the same and the Linksys got faster. This suggests that the MU-MIMO adapter is a bit happier when further away from the router.
On the 5GHz band this was far more pronounced. Finally, the AC600 MU-MIMO dongle scores started to out-perform the SP3. Except for with D-Link which may demonstrate that, for once, a lack of MU-MIMO compatibility was a hindrance.
As can be seen, we later ran these tests on an empty network – it had become evident that one-floor-up was the AC600 MU-MIMO dongle’s sweet spot by then – in order to see how much difference having ‘slow’ devices on the network actually made. On the SP3’s WiFi, at 2.4GHz, across the board, speeds slowed down less than 3MB/s when there was other traffic present. All speeds were still faster than with the AC600 MU-MIMO dongle although slowdowns only ranged between 0.3 and 1.1MB/s. That slightly-narrower range may represent a win for MU-MIMO, but when you’ve already lost the race, how much does it matter?
Things changed in the 5GHz test. Speed drops were minimal on the SP3’s WiFi (save for one of the Netgear's two 5GHz networks recording a 3.1MB/s drop). However, when MU-MIMO kicked in, we finally saw some differences. Both the Linksys and Netgear results got faster when the AC600 MU-MIMO dongle was used. As for why this would be faster than an empty network is anyone’s guess. Perhaps, it was triggered into putting in extra effort? Meanwhile, D-Link’s low scores were likely caused by its “intelligent” Smart Connect technology using the 2.4GHz band by mistake although we can't rule out a MU-MIMO-related technology component.
Two Floors up
At two floors up, at 2.4GHz, the Surface Pro 3 won again. Speeds were noticeably faster than when using the AC600 dongle. The D-Link couldn’t actually connect at all when the dongle was used.
At 5GHz the Netgear couldn’t connect to the SP3’s WiFi or the dongle while the D-Link couldn’t connect just to the dongle. However, the Linksys did see the AC600 dongle beat the SP3’s WiFi.
We’ve also tested Linksys’ RE7000 Max-Stream AC1900+ WiFi Range Extender with this AC600 USB dongle and you can see more results there. They largely reflect what we saw here though.
If you are too close or too far from the router then the AC600 dongle struggled when compared to the Surface Pro 3. We suspect this is due to the size and arrangement of the antennae in the SP3 more than anything else. On the sweet-spot (one-floor up at 5GHz) occasions when the AC600 dongle’s technology really kicked in, we saw some decent performance. We strongly suspect that if this technology was built into a device like the SP3 we’d get even more speed.
We must remember that the Surface Pro 3 (and its innards) still represent recent technology. Many people will have laptops and tablets that struggle with WiFi – especially if it’s not 802.11ac (the latest standard) compatible. If this is the case and you want to boost the WiFi in your home with a MU-MIMO router then the dongle can make a great choice and you’ll notice a great difference.
Join the PC World newsletter!
Linksys AC5400 MU-MIMO Gigabit router
Lexar® JumpDrive® S57 USB 3.0 flash drive
Samsung portable 1TB T3 drive
Everki ContemPRO Roll Top Laptop Backpack
Epson WorkForce ET-4550
Microsoft L5V-00027 Sculpt Ergonomic Keyboard Desktop
Epson EcoTank Expression ET-2500
Smart LED Bulb LB130
3SIXT Ultra HD Sports Action Camera
Huawei Mate 9
Epson WorkForce DS-360W
Acer Swift 7
Lexar® Portable SSD
Logitech G403 Prodigy mouse
Lexar® JumpDrive® S45 USB 3.0 flash drive
Belkin MIXIT Metallic Lightning to USB Cable
Google Daydream VR headset
Blade 28 backpack by Arc’teryx
HP Pavilion x360 13”
Audio-Technica ATH-ANC70 Noise Cancelling Headphones
Garmin Fenix Chronos smartwatch
Dell Inspiron 5000 series 2-in-1
Lexar® JumpDrive® C20c USB Type-C flash drive
HD Pan/Tilt Wi-Fi Camera with Night Vision NC450
Lexar® Professional 1800x microSDHC™/microSDXC™ UHS-II cards
Surface Pro 4
Dell XPS 13 laptop
Most Popular Reviews
- 1 Oppo R9s Plus phone: Full, in-depth review
- 2 Samsung 2017 QLED Q7 TV: Full, in-depth review
- 3 HTC U Ultra phone full, in-depth review
- 4 Gigabyte Aorus GA-AX370-Gaming 5 AMD Ryzen AM4 motherboard review
- 5 Venom Blackbook Zero 14 laptop review
Latest News Articles
- Chips coming by June will herald the next generation of Wi-Fi
- Plume's 'routerless' mesh network blankets your home in Wi-Fi with an army of tiny pods
- Netgear Nighthawk X10 AD7200 Smart WiFi Router goes all the way to 11
- Can Wi-Fi and LTE-U live together? The tests are ready
- New wireless tech from MIT promises password-free Wi-Fi
PCW Evaluation Team
A smarter way to print for busy small business owners, combining speedy printing with scanning and copying, making it easier to produce high quality documents and images at a touch of a button.
I've had a multifunction printer in the office going on 10 years now. It was a neat bit of kit back in the day -- print, copy, scan, fax -- when printing over WiFi felt a bit like magic. It’s seen better days though and an upgrade’s well overdue. This HP OfficeJet Pro 8730 looks like it ticks all the same boxes: print, copy, scan, and fax. (Really? Does anyone fax anything any more? I guess it's good to know the facility’s there, just in case.) Printing over WiFi is more-or- less standard these days.
As a freelance writer who is always on the go, I like my technology to be both efficient and effective so I can do my job well. The HP OfficeJet Pro 8730 Inkjet Printer ticks all the boxes in terms of form factor, performance and user interface.
I’d happily recommend this touchscreen laptop and Windows 10 as a great way to get serious work done at a desk or on the road.
Ultimately, I think the Windows 10 environment is excellent for me as it caters for so many different uses. The inclusion of the Xbox app is also great for when you need some downtime too!
For me, the Xbox Play Anywhere is a great new feature as it allows you to play your current Xbox games with higher resolutions and better graphics without forking out extra cash for another copy. Although available titles are still scarce, but I’m sure it will grow in time.
- LG G6: unboxing, hands on review and detail shots
- Samsung Galaxy A5 2017: unboxing, hands on review and detail shots
- And the 2017 winner of the Formula 1 Best Pit Lane Boom Gantry is...
- What's the difference between an Intel Core i3, i5 and i7?
- Laser vs. inkjet printers: which is better?
- FTSocial Media ExecutiveNSW
- CCApplication Support Specialist- Bathurst or Port MacquarieNSW
- FTProject Manager - Finance BackgroundQLD
- FTICT ManagerNSW
- FTInfrastructure ArchitectWA
- FTEnterprise Solution ArchitectNSW
- FTICT Change AnalystSA
- FTJunior-Mid Level Implementation CoordinatorQLD
- CCInfrastructure Test Lead - Contract 6-8 wks initially - IT Services - North RydeNSW
- FTSenior Android DeveloperNSW
- FTSolution ArchitectVIC
- CCInfosphere ConsultantACT
- FTRelease Coordinator - Project ManagementQLD
- FTSecurity Lead / ConsultantNSW
- FTSenior Java DeveloperQLD
- FTWEB DesignerQLD
- CCOrganisational Change LeadNSW
- FTField Hardware Deployment EngineerNSW
- TPSystems ManagerQLD
- CCLead SAP SRM DeveloperACT
- FTSenior Applications Support AnalystSA
- TPSalesforce Functional AnalystNSW
- CCSenior Project ManagerNSW
- FTSenior Java Developers (Several positions available)QLD
- FTIT Project Manager. Ciritical permanent roleNSW